On Wed, 28 Jul 2004 14:22:17 +0200, Evert Meulie <[EMAIL PROTECTED]> wrote: > Hi everyone! > > Who can tell me how I can access my voicemail? When I dial the voicemail on > my Cisco 7960 I get access, but when trying to enter my mailbox number it > seems that Asterisk doesn't 'get' any of the keys I press. DTMF problem > perhaps? > > Any suggestions on how/where to fix this...?
I had a similar problem. If you look at the console, you'll probably either see it missing digits, or sending too many digits. Even though I was using ulaw as my codec, Asterisk didn't like my specifying dtmfmode=inband. I commented out that line and away it went fine. Here is my current sip.conf for my 7960 which works (connected directly to the Asterisk box) [100] type=friend secret=password username=100 callerid="Leif Madsen" <18924> context=extensions ;dtmfmode=inband qualify=yes nat=no host=dynamic canreinvite=no disallow=all allow=ulaw allow=alaw allow=g729 mailbox=100 HTH, Leif Madsen. http://www.asteriskdocs.org _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
