Thanks to Florian and Scott, I cvs the latest and used your instructions. It worked perfect.Digium should include these instructions as an alternative in their guide for IAXy. Thanks again, Eugen --- Scott Petersen <[EMAIL PROTECTED]> wrote: > On Thu, Jul 29, 2004 at 10:21:17PM +1200, Eugen > Cristea wrote: > > Asterisk refuses to register IAXy.I am using the > "IAXY > > Configuration Guide" that comes with the IAXy. > > The guide does not say anything about the > [general] > > section in the iax.conf and the handbook has no > IAXy > > example. > > Any hints? > > Thanks > > > > Did you provision the IAXy to give it a server, > username, password etc? There are two ways to do > this, one is using the provisioning tool mentioned > in the guide the other is to use the provisioning > built in to asterisk. > > There is a config file in more recent builds of > asterisk called iaxprov.conf. In there you put a > template entry such as: > > [default] > port=4569 > server=192.168.1.103 > language=en > codec=ulaw > flags=register > tos=lowdelay > > You then add an entry for each IAXy device that you > want to provision and reference this template. Any > entries in the default template will be picked up. > > [backoffice] > user=backoffice > pass=supersecret > template=default > > Once that is set up and you have reloaded the config > files, you can go to the asterisk console and type: > > iax2 provision <ip of iaxy> backoffice > > You will, of course, have to determine what the IP > address of the IAXy is in the first place. This can > be easy or hard depending on if you have access to > the DHCP logs for your network. For more information > on this command you can do: help iax2 provision > > Once you power cycle the IAXy it will attempt to > connect to the asterisk server at 192.168.1.103 and > register with the username and password. This means > that you will have to have an entry in your iax.conf > file that matches. For example: > > [backoffice] > type=friend > host=dynamic > context=default > secret=supersecret > disallow=all > allow=ulaw > > I hope this helps > > Cheers > Scott Petersen > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users >
Find local movie times and trailers on Yahoo! Movies. http://au.movies.yahoo.com _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
