Roman Bessyadovskii wrote:
Yes, I can make a call on that extension from other definity phone, if you mean it.
-----Original Message-----
From: Ken Godee [mailto:[EMAIL PROTECTED] Sent: 30 ���� 2004 �. 19:14
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] Connecting Asterisk and Avaya Definity By E1.
Incoming work, but not outgoing
Roman Bessyadovskii wrote:
Hi All.
I connect asterisk and definity by manual at www.voip-info.org/tiki-index.php?page=Asterisk%20Avaya. (I just only have E1, not T1 card).
I see, that card work (in definity trunk status, and at asterisk
Incoming call, from definity is work ok, but when I try outgoing call, I recive
-- Executing Dial("SIP/1015-870f", "Zap/g1/2073") in new stack -- Called g1/2073 -- Channel 1, span 1 got hangup -- Hungup 'Zap/1-1' == No one is available to answer at this time
How fix it?
Do you have the "Dial Plan" set up properly on the Definity side?
No, that's not what I mean.
You must understand how the "Dial plan" is used in the Definity.
Are all your extensions on the Definity 4 digits starting with a 2?
If you do not have first digit "2", length "4", type "extension"
set up in the dial plan, Definity will not know what to do with the four digits your sending into the switch.
do a "display dialplan" and make sure it is set up correctly.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
