Cisco PRI card in a 7200 running lastest IOS --> SIP --> *
Problem #1: SIP authenticates it under "general" and gives it the context from [general] not from [cisco.ip.address.here].
Here's the relevant party of sip.conf:
[209.104.XX.YY]
context=dids
type=friend
host=209.104.XX.YY ; IP address of Cisco gateway
dtmfmode=rfc2833
disallow=all
allow=ulaw
[general] ... context=weshouldnevergetthis ...
When there is that context line in [general], the cisco gets that context. When there isn't, SIP DEBUG PEER buys us this: SIP Debugging Enabled for IP: 209.104.2.51:5060 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 Peer RTP is at port 209.104.2.51:0 [and so on]
SIP SHOW PEER properly displays context=dids ... but yet... that's not the context
that gets assigned to it. No context if [general] has none, context from general when
it has one.
Help?
Ehud [EMAIL PROTECTED] _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
