Hey all. I called CAC. It appears that mine has the firmware for TR-08. I was informed that they do sell the 3 firmware chips (1 for each card), to make it a regular D4/ESF unit if anyone is is having this same problem. They are around $200 and can be purchased from their support.
I'm probably going to get the new ones and see if that totally solves my prob. I'll post again with the results if we go that way. Also, if anyone needs to know how to identify this: 1. On the T1 board (small skinny one where T1 plugs in, there is a big chip by where the CAC logo is stamped. On it it should have a sticker. If the sticker reads "TR-08/DR", you are in the same boat as me. 2. On the FXS boards you will see another chip similar to the first. If it reads similar to "SLC V1.2" (Version numbers may vary), you will need to replace the chips on this as well. Hope this helps anyone having the same prob... -Ronan On Wed, 2004-08-04 at 18:26, Tim McKee wrote: > Agreed, I'm using an AB2 with no problems at all. Can't speak for AB1. It > is probably signalling though. > > Here is my config for an AB2: > > /etc/zaptel.conf > > # span 3 is for channel bank (24 FXS) > span=3,0,0,d4,ami > fxoks=49-72 > > /etc/asterisk/zapata.conf > > [channels] > use_callerid=yes > callwaiting=yes > restrictcid=no > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > ;echotraining=yes > echotraining=800 > relaxdtmf=no > rxgain=0.0 > txgain=0.0 > callgroup=1 > pickupgroup=1 > immediate=no > amaflags=billing > accountcode=sdnclt > ; > ; Default language > ; > language=en > . > . > . > context=dialnational > ; > signalling=fxo_ks > use_callerid=yes > callwaiting=yes > restrictcid=no > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > echotraining=800 > relaxdtmf=no > rxgain=0.0 > txgain=0.0 > callgroup=1 > pickupgroup=1 > immediate=no > amaflags=billing > accountcode=sdnclt > > > callwaiting=yes > ; > callerid=SDN ssssssss <xxx> > channel => 49 > ; > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Steven > Critchfield > Sent: Wednesday, August 04, 2004 17:10 > To: [EMAIL PROTECTED] > Subject: Re: [Asterisk-Users] CAC AB1 and Asterisk > > On Wed, 2004-08-04 at 15:26, Ronan wrote: > > Any ideas on this? > > Have patience is the first idea. > > While there is a large subscriber base, there isn't a large base of > knowledgable users with that hardware. You haven't let enough time pass to > be sure people with the knowledge have seen it. > > I would suspect that you have a signalling problem. Configs would have to be > shared for that to be diagnosed though. > > > On Wed, 2004-08-04 at 01:06, Ronan wrote: > > > Hi all, > > > > > > Don't know if anyone can help me. We just set up a CAC > > > Access Bank 1 with Asterisk. Everything works great except, when we > > > ring a Zap interface, the analog phone does not actually ring. The > > > light blinks, and if you answer it you are connected to the person, > > > but the actual phone does not ring. > > > > > > Using the "Test" option for the channel does make the phone > > > ring, but not during an actual call. > > > > > > Has anyone had this prob before. I saw something about it > > > on a list from back in 2002, but no answer. :( > > > > > > Any help would be appreciated. > > > > > > Thanks, > > > > > > -Ronan > > > > > > _______________________________________________ > > > Asterisk-Users mailing list > > > [EMAIL PROTECTED] > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > To UNSUBSCRIBE or update options visit: > > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > -- > Steven Critchfield <[EMAIL PROTECTED]> > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
