Re: [Asterisk-Users] Generic X100P setup issues

[hank]

you tried kirnil 2.6.5? that sounds simular to what I experenced with my clone card on my dibean box until I upgraded my kirnil. give that a shot. hth hank ----- Original Message ----- From: Graham W. Mitchell To: [EMAIL PROTECTED] Sent: Saturday, August 07, 2004 5:41 PM Subject: [Asterisk-Users] Generic X100P setup issues I am starting to dip my toes into the asterisk world, and to that end I�ve scavenged an old PC (this is a home project, and I have basically $0 to spend on it), and installed FC1. I�ve purchased a clone X100P (or at least I was told it was), and I am trying to get it to work. However, when I try and load the wcfxo module, I get the following errors�   [EMAIL PROTECTED] root]# insmod wcfxo Using /lib/modules/2.4.22-1.2115.nptl/misc/wcfxo.o /lib/modules/2.4.22-1.2115.nptl/misc/wcfxo.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.       You may find more information in syslog or the output from dmesg   Unfortunately, there is no other info in /var/log/messages or from dmesg�   The lspci �vv for the card shows the following�   00:08.0 Modem: Intel Corp.: Unknown device 1080 (rev 04) (prog-if 00 [Generic])         Subsystem: Intel Corp.: Unknown device 1000         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-         Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-         Latency: 32 (250ns min, 15500ns max), cache line size 08         Interrupt: pin A routed to IRQ 10         Region 0: Memory at db100000 (32-bit, non-prefetchable) [size=4K]         Region 1: I/O ports at e800 [size=256]         Capabilities: [80] Power Management version 2                 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)                 Status: D0 PME-Enable- DSel=0 DScale=0 PME-     Is this indeed a generic X100P? If so, does anyone have any suggestions what to look at next?     Thanks     Graham My Inbox is protected by SPAMfighter 272 spam mails have been blocked so far. Download free SPAMfighter today!