Hello-
Sorry if you see this again, I am new to this list and accidentally put this message in another thread.
What I want to know is, is there any way to send a hook-flash signal from a cell phone (and then have Asterisk pass it up to the PSTN?)
I suspect we need an example.
I have an X100P to the PSTN and an S100U to an Analog Phone (ext. 3100) Let's say my PSTN number is 555-1296. Usually, I have Asterisk take incoming calls on the X100P and send them to the analog phone on the S100U (exten => s,1,Goto(3100)) and from time to time I set Asterisk to call my cell phone, which it does over IAX with another asterisk server from a different PSTN number.
What happens when another person calls me on 555-1296? I would like to know how to answer the call waiting both from the analog phone and from the cell phone. But the key is - needs to happen not at the asterisk level, but asterisk needs to pass the flash to the PSTN.
In summary:
I call from the analog phone over IAX. S100U in use, X100P not in use. - Call comes in, I can flash it to take the new call.
I call from the analog phone over the PSTN. S100U in use, X100P in use. - Call comes in, I hear the PSTN-generated call waiting signal, but can't switch - Need help here.
I get a call that is sent to my cell phone. S100U not in use, X100P in use. - Call comes in, I hear PSTN-generated call waiting signal on my Cell Phone, but can't switch - Need help on this one too.
Any suggestions???
Thanks!
-Matt
