Yes I'm sure, although just in case, I tried both point to point and point to multipoint modes in zapata.conf
Gary
----- Original Message ----- From: "Michael Sandee" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, August 11, 2004 1:55 PM
Subject: Re: [Asterisk-Users] zaphfc problems...
Although I don't think the error message would indicate something like this... but... are you sure you have a ptp isdn line (bri_cpe versus bri_cpe_ptmp).
Gary Pigott wrote:
I think I'm going slightly mad.....
I've got a Dell PowerEdge 400SC (Cel 2.4GHz, 256MB RAM, 40GB HDD) that I'm using to set up a * PBX for a (very) small startup.
It's running Debian Sarge with the stock 2.4.26 kernel (I know it's still an "unstable" release, but I'd need to jump through all sorts of hoops to get Woody working properly). The plan is to use a BRI ISDN for inbound, and fallback outbound, and IAX2 for the bulk of outbound calls over ADSL (dialing _9X goes over IAX and _8X over ISDN. Nothing more complicated than that). I'm using a generic HFC-S card from Billion.
I'm using vanilla bri-stuff-0.1.0-RC2k from www.junghanns.net and everything looks right. There are no errors or warnings during startup. It seems to work correctly (well SIP and IAX2 anyway) until I try to dial out over the ISDN line.
I get the following:
*CLI> -- Executing Dial("SIP/602-9964", "Zap/g1/226581") in new stack
Aug 11 11:51:08 NOTICE[245775]: app_dial.c:719 dial_exec: Unable to create channel of type 'Zap'
== Everyone is busy/congested at this time
There are channels there: *CLI> zap show channels Chan Extension Context Language MusicOnHold pseudo default en default 1 default en default 2 default en default
and the zaptel, zaphfc, isdn and hisax modules are loaded correctly in the kernel.
for anyone who's interested, the config files are at http://www.garypigott.net/files/asterisk/extensions.conf http://www.garypigott.net/files/asterisk/modules.conf http://www.garypigott.net/files/asterisk/zapata.conf http://www.garypigott.net/files/asterisk/zaptel.conf
I've looked at the previous thread, started by Wim Venneman in February, but it doesn't apply, because I can see channels in asterisk.
Any help would be greatly appreciated.
Regards,
Gary
Self-referencing Five, seven, five syllables This haiku contains http://garypigott.net
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
