Klaus- Yes, that was causing the problem. Assuming that the modprobe of the E1 would also do a ztcfg, I removed the ztcfg shown here, and now both boards come up and work:
cd /usr/src/bri/bri-stuff.0.1.0-RC2g/qozap modprobe -v zaptel >>/var/log/asterisk/modprobe.log insmod -v qozap.o modprobe -v wct1xxp ztcfg -vv ** REMOVED THIS Normally, when I have a system with just an E1, I do a modprobe first and then a ztcfg, which gives me a reassuring list of channels. I guess the redundant ztcfg doesn't matter in this case. Thanks for your help Scott Stingel Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Klaus-Peter Junghanns Sent: Thursday, August 12, 2004 3:52 AM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] BRI and E1 in same system Hi Scott, make sure that ztcfg is only run once. Modprobing the e100p driver probably triggers this automatically. I am still investigating why qozap/zaptel becomes unhappy when ztcfg is run twice. If you want me to take a look via ssh, let me know. best regards Klaus Am Do, den 12.08.2004 schrieb Scott Stingel um 12:40: > Hi- > > Anyone using the Junghann's quad BRI card and the Digium E100P in the > same system? > > I'm having a configuration problem where I can configure the cards one > at a time (with the appropriate drivers loaded) in a system, but when > I try them both together, neither will work. They both work fine one at a time. > Probably has something to do with the channel numbering. > > I've tried numbering the channels with the E1 first (which produces > lots of modprobe errors), and then with the BRI span's first, which produces no > modprobe errors, but doesn't work. Here is the latter configuration: > > ZAPTEL.CONF (excerpt): > # qozap span definitions > # most of the values should be bogus because we are not really zaptel > span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami > span=4,0,3,ccs,ami > > # E1 definition: > span=5,0,0,ccs,hdb3,crc4 > > #BRI's: > bchan=1,2 > dchan=3 > bchan=4,5 > dchan=6 > bchan=7,8 > dchan=9 > bchan=10,11 > dchan=12 > > #E1: > bchan=13-27,29-43 > dchan=28 > > --------------------------------------- > > ZAPATA.CONF (excerpt) > switchtype = euroisdn > > ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) > signalling = bri_cpe_ptmp > > ; define 4 BRI's: > pridialplan = unknown > prilocaldialplan = unknown > echocancel = yes > > context=incoming > group = 1 > ; S/T port 1 > channel => 1-2 > > group = 2 > ; S/T port 2 > channel => 4-5 > > group = 3 > ; S/T port 3 > channel => 7-8 > > group = 4 > ; S/T port 4 > channel => 10-11 > > ; E1 - for output to external Dialogic only ; we are pri_net in this > case > > group = 9 > pridialplan = unknown > signalling=pri_net > channel => 13-27,29-43 > > ------------------------------------------ > > STARTUP MODPROBES, ETC: > #following for Quad BRI system: > cd /usr/src/bri/bri-stuff.0.1.0-RC2g/qozap > modprobe -v zaptel >>/var/log/asterisk/modprobe.log sleep 1 insmod -v > qozap.o >>/var/log/asterisk/modprobe.log sleep 1 > > # following for single E1 system > modprobe -v wct1xxp >>/var/log/asterisk/modprobe.log sleep 2 > > ztcfg -vv >>/var/log/asterisk/modprobe.log sleep 3 echo > >>/var/log/asterisk/modprobe.log > > ------------------------------- > > Thanks for any help! > Regards > > Scott M. Stingel > President, > Emerging Voice Technology, Inc. > Palo Alto California & London England > www.evtmedia.com > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
