I have tried with insecure=very in the [sipgate] section of my sip.conf. This stops outgoing calls from working and still no incoming calls. Taking it out reverts to outgoing working but incoming still reporting "unable to authenticate ..." I stopped and restarted asterisk after each change.
Simon Brown -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thorsten Huber Sent: Thursday, 12 August 2004 23:01 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] Problems receiving SIP calls Hi, On Thu, Aug 12, 2004 at 07:42:28AM -0600, Rich Adamson wrote: > There has been far more then one implementor that didn't realize that > many of the changes made to sip.conf (and other config files) are not > used unless you stop and restart asterisk. A Reload doesn't cut it. > Are you sure you're restarting asterisk after the parameter changes? I've checked that again. And you're right. I've restarted asterisk after inserting "insecure=very" but only reloaded after commenting it out. -- Gruss / Best regards | LF.net GmbH | fon +49 711 90074-414 Thorsten Huber | Ruppmannstrasse 27 | fax +49 711 90074-33 [EMAIL PROTECTED] | D-70565 Stuttgart | http://www.lf.net _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
