Hi,
This is the scenario
I have the SJlabs phone with g711ulaw active and the rest disabled.
I have * with chan_h323
I have a Quintum DX  that supports, g723.1 , g729AB, ulaw and alaw.

The problem is that, it does not mather what I put in the extensions.conf  I have tried all possible ways that I so far could find using the net.
I tried all possible codecs ulaw, alaw, g723 and g729 always the same result.
The phone rings but as soon as answered it dissconnects.

The debug shows

    -- Executing Dial("SIP/sj1-4ff7", "H323/0797617729") in new stack

    -- Called 0797617729

    -- H323/0797617729 is ringing

    -- H323/0797617729 answered SIP/sj1-4ff7

  == Spawn extension (default, 0797617729, 1) exited non-zero on 'SIP/sj1-4ff7'

    -- Executing Dial("SIP/sj1-4ff7", "H323/h") in new stack

    -- Called h

  == Spawn extension (default, h, 1) exited non-zero on 'SIP/sj1-4ff7'

 The first Dial is normal but the 2nd Dial  Executing Dial("SIP/sj1-4ff7", "H323/h") in new stack”

Where do that come from?

PLEASE someone HELP!

The * have the config below

In extensions.conf I use
[globals]
[default]
exten => _.,1,Dial(H323/${EXTEN})
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
in H323.conf I use
[general]
port = 1720
bindaddr = 195.216.65.212
tos=lowdelay
allow=all
gatekeeper = 195.216.65.215
AllowGKRouted = yes
context=default
[AST37]
type=h323
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

In SIP.conf I have
[general]
port=5060                   
bindaddr=xxx.xxx.xxx.xxx

[sj1]
type=friend                
context=default
host=dynamic        
disallow=all            
allow=all            
username=sj1                
secret=sj1

[sj2]
type=friend                   
context=default
host=xxx.xxx.xxx.xxx          
allow=ulaw                  
username=sj1           
secret=sj1
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

administrator tootai wrote:
Krystian Filiks a écrit :

Like you suggested I tried the g.711 now and got the same, The called number rings but when answered it dropped.
I connect to a Quintum Tenor DX.

The part I'm curious about is  6:53.985           Transactor:8140ee8    h323trans.cxx(678)   Trans   admissionRequest rejected: requestDenied
 6:53.988          H225 Caller:8159198         h323.cxx(2660)  H225    Gatekeeper refused admission: requestDenied
 6:53.959          H225 Caller:813c890      h323pdu.cxx(1159)  H225    Read error (0):

Does anyone have a clue where to look for the problem?

here is a trace,
-- Executing Dial("SIP/sj1-a7e9", "H323/[EMAIL PROTECTED]") in new stack
Allowed Codecs:
        Table:
  G.711-uLaw-64k{sw} <1>
Set:
  0:
    0:
      G.711-uLaw-64k{sw} <1>

-- Making call to [EMAIL PROTECTED] using gatekeeper.
               channelsOpen = 1
               channelsOpen = 0
 6:53.959          H225 Caller:813c890      h323pdu.cxx(1159)  H225    Read error (0):
       == New H.323 Connection created.
       -- sj1 is calling host [EMAIL PROTECTED]
       -- Call token is ip$localhost/31767
       -- Call reference is 31767
   -- Called [EMAIL PROTECTED]
       -- ClearCall: Request to clear call with token ip$localhost/31767
       -- Sending RELEASE COMPLETE
 == Spawn extension (default, h, 1) exited non-zero on 'SIP/sj1-a7e9'
 6:53.985           Transactor:8140ee8    h323trans.cxx(678)   Trans   admissionRequest rejected: requestDenied
 6:53.988          H225 Caller:8159198         h323.cxx(2660)  H225    Gatekeeper refused admission: requestDenied
 6:54.004                 H323 Cleaner         h323.cxx(1542)  H323    Connection ip$localhost/31766 terminated.
-- Call with Tenor Gateway [195.216.65.215] completed (EndedByLocalUser)
       == H.323 Connection deleted.
 

What's [EMAIL PROTECTED]? If you are register to GK H323/<EndPoint> is enough. I don't understand your h EP. And also request denied seems that you need to register. But I don't know how work Quintum, maybe I'm wrong.

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of administrator tootai
Sent: Thursday, August 12, 2004 6:02 PM
To: [EMAIL PROTECTED]
Subject: Re: [Asterisk-Users] H323 call dropped when answered

Krystian.Filiks a écrit :

 

Hello anyone that can help me here?? please read below.
[...]

  
Allowed Codecs:

        Table:

  G.723.1{sw} <1>

Set:

  0:

    0:

      G.723.1{sw} <1>

    
G.723.1 is not a codec in * Use g711 instead. If your GK is GnuGK, see his debug logs. Also, run asteriks in debug mode and check logs in full file.

 


_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to