Thanks to pointers from Peter Svensson, I've solved the problem. I needed pridialplan=unknown in my zapata.conf
All's good to go ! I can now call numbers with the leading zero ! Thanks very much. Julian. ----- Original Message ----- From: "Asterisk" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, August 13, 2004 8:37 AM Subject: Re: [Asterisk-Users] outgoing ZAP cannot connect using E1 isdn > Spooky - I was at this second about to report that I have got it working, > though I don't know why ... > > If the number I want to call is 07803xxxxxx then if I say > Dial(Zap/g1/7803xxxxxx) the damned thing works. > > So it seems that something is automatically adding the "0" to the dialled > string. What would be doing that ? > > I'm going to try your suggestion of the pridialplan and prilocaldialplan and > see what difference this makes. However, where do I put these commands and > what data should I set it to ? (google here I come!) > > Many thanks for taking the time to respond. > > Julian > ----- Original Message ----- > From: "Peter Svensson" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Friday, August 13, 2004 8:12 AM > Subject: Re: [Asterisk-Users] outgoing ZAP cannot connect using E1 isdn > > > > On Thu, 12 Aug 2004, Asterisk wrote: > > > > > What I can do: Call from outside into the asterisk, dial an extension, > and > > > pass through to the meridian. WooHoo. > > > > > > What I can't do: Call from outside (firstnum) into the asterisk , dial > an > > > extension which calls an outside number (SecondNum). I get the BT > three-tone > > > (number has not been recognised). Is it that the outgoing number is > being > > > mangled ? If so, where to look ? > > > > Can you place any calls from Asterisk to the pstn? If not then I suspect > > you need to set the pridialplan (and later on prilocaldialplan for > > CallerID) to something. Exactly what depends on the number format you use. > > For the standard national number format I think "pridialplan=unknown" is > > the way to go. > > > > You could try enabling debugging with "pri intense debug span 1" to see > > exactly what the pstn returns. > > > > Also, since you are on a pure tdm path you may want to try disabling echo > > canceling. It has nothing to do with your current problem though. > > > > Peter > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
