On Fri, 2004-08-13 at 22:06, Craig Guy wrote: > Hi, > > now that these cards have approval in Australia, has anyone had any luck in > connecting them to a Telstra Onramp 10 service? Are these configured as a > PRI, bchan=1-10, dchan=16 in zaptel.conf and switchtype=euroisdn in > zapata.conf? Better yet anyone have any of the above .conf files they could > share?
Yes, it works fine... although I get 'static' on calls connected to 'some' numbers (sometimes).... Where static could be echo/feedback/weird sounds while the remote person talks. Only the remote person hears it. zaptel.conf: span=1,1,0,ccs,hdb3,crc4 bchan=1-10 unused=11-15,17-31 dchan=16 asterisk/zapata.conf [channels] usecallingpres=yes relaxdtmf=no rxgain=0.0 txgain=0.0 busydetect=no pridialplan=local nationalprefix=0 internationalprefix=0011 usecallerid=yes hidecallerid=no callwaiting=no callwaitingcallerid=no threewaycalling=no transfer=no cancallforward=no callreturn=no echocancel=yes echocancelwhenbridged=yes echotraining=yes callerid=asreceived adsi=no callprogress=no switchtype => euroisdn signalling => pri_cpe callgroup => 1 group => 2 immediate => no context => remote channel => 1-10 That's what I use... If anyone happens to see something I am doing which might break things/cause the problems I am having, please let me know... I would also be interested to hear how your setup goes... Mostly I have the problem when I call my mobile from a TDM FXS port on the same asterisk box. > Is an onramp 10 what is referred to as a 'channel bank'? No, channel bank converts the E1/T1 into analogue lines. Regards, Adam _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
