Yes, we are experiencing the same problem and because of that we switched the called HT ata to Cisco ATA 186 ...
Lubo
Andy Lee wrote:
[ Message pasted from Sun, 7 Mar 2004 08:27:54 -0600 ]
The problem I'm experiencing with many GS adapters, regardless of firmware version is this. Call from one phone to another phone using both the 'T' and 't' flags in the Dial() command. After they are connected, you should be able to press '#' on either phone to hear "transfer". What I am experiencing is the calling GS adapter will hear "transfer" when they press '#', but when the receiving GS adapter presses '#', nothing happens at all. Are you able to repeat this? If not, can you please tell me the firmware revisions and Asterisk version that you are using?
Thank you very much.
Yes, I am experiencing the same problem. Works fine with the BudgetTone phones but not with the HandyTone-286.
Have you resolved this yet? We've been trying to figure this out on and off for the past couple of weeks. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
--
---------
Appradius Project: RADIUS authentication and accounting support for Asterisk PBX
http://appradius.minitelecom.org/
---------
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
