Hello:
Hoping someone might know how to resolve this (probably an easy one). I have one Asterisk PBX with a single NIC and an FXO card with PSTN line attached, and one IP phone (Budge Tone 100) on the LAN. Via the phone I get no dial tone, and dialing 9, <number> doesn't allow me to dial out. I also need the phone to ring when the asterisk PBX is called. I have modestly tweaked the sample configs to get this far.
I can check and retrieve and delete voicemail via the phone however. Any ideas?
Curt
The Budgetone 100 should be generating the dialtone, so this is not an * issue, per se. However, that said, the newer versions of the firmware (in the 1.0.5.xx range) suppresses the generation of dialtone if the phone does not register properly and the register option is enabled. Make sure that your phone is registering properly - see the many, some recent, posts on this subject. Note that it is possible to retrieve voice mail on an unregistered phone, but you won't be able to receive calls (because * won't know the IP address).
Stephen R. Besch
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
