Changed. That's it? My zaptel.conf and zapata.conf files look good? Wow, I really felt I was winging it with them, I didn't have too much confidence in them.
On Mon, 2004-08-16 at 13:18, Andrew Kohlsmith wrote: > On Monday 16 August 2004 12:46, drodden wrote: > > span=1,2,0,esf,b8zs > > try 1,1,0,esf,b8zs > > I am assuming this is the only T1 in this box. Don't need the dynamic line > (it's commented out anyway). > > > I don't know if I need that dynamic line or not. There's no mention > > about it in the wiki. Also, the wiki says the span line should > > be"span=1,1,0,esf,b8zs" but you recommended I let the remote do the > > timing, so I set this as "Secondary", should it be Secondary, or should > > I just turn it off completely? Anything I'm missing? > > You're misunderstanding the clocking parameter: > > 0 = do not use this span as a clock source > 1 = use this span as the primary clock source > 2 = use this span as the secondary clock source > 3 = use this span as the tertiary clock source > ... etc. You need a clock source. The secondary, tertiary and so on only > become the clock source if the primary (or secondary, and so on) is down. > > Since I think you want to use the PBX as the clock source you should be giving > it a value of '1', as there are no other T1s in this box and the zaptel card > needs clock to come from somewhere. i.e. it needs SOME T1 to be a primary > clock. > > -A. > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
