On Tue, 2004-08-17 at 14:08, Jason Kawakami wrote: > Hello all- > > So I have * up and running and connected to a legacy system via em_w lines > and have no trouble dialing from * through the tie line but from the PBX > across the tie line I am having intermittant receipt of the DTMF. T-Berd > testing is showing that the digits are coming across but * is either missing > the first digit consistantly. > > This seems to me to have something to do with start timers or inter-digit > dtmf timers or something. > > I have even tied 2 * together each with t100 cards and have the same > problem. > > Not sure how to proceed, any suggestions? > > Jason Kawakami > I had nearly the same issue between * and an nec pbx. The only way I could get around it was to either make the number a speed dial, or tell the users if the call failed to use the redial button on their phones. However * had issues with the last digits, not the first.
The wiki has a section on the inter digit timers, but all the examples I've seen are confined to incoming calls to voicemail. t o n y _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
