Hello all, I currently have an Eicon Diva Client isdn card using i4l. Outbound dtmf doesn't work (and never has), but there has been an annoying problem with false dtmf detection in calls (that could be triggered easily by blowing into the receiver on the remote end).
I looked through the list and found two patches that need to be applied - 1 to isdn_tty.c in the kernel, and another to chan_modem_i4l.c in Asterisk. This morning (and I say morning - because it's now 4:50am Friday here) I was feeling adventurous, so I applied the patches and recompiled my kernel. Once that was done, I started up Asterisk and noticed that there was no false DTMF (well - no dtmf was detected at all). Time for the second patch. I applied the second patch to chan_modem_i4l.c successfully and recompiled Asterisk (make clean; make; make install). Unfortunately I still can't get DTMF working. I've included my modem.conf below in case there might be any settings that could help: [interfaces] context=incoming-isdn driver=i4l language=en type=autodetect dialtype=tone mode=immediate features=noquelch,dtmf group=1 msn=4627xxxx incomingmsn=4625yyyy,4625zzzz,4627xxxx device => /dev/ttyI0 device => /dev/ttyI1 If anybody knows anything that might help - any help would be greatly appreciated. Failing that - does anybody know where to buy an AVM Fritz!Card in Australia? (or some card that plays nicely with ISDN and Asterisk and doesn't use i4l)? I found one place that sells them but the price is more than I was hoping to pay (when looking at what they're available for from Germany, etc). Thanks, Shaun _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
