Sorry for top-posting just carrying on the tradition... I had major problems with this last week on an IAX-FXO-Phone during a conference. I was disconnected every 30 minutes or so.
I noticed some oddities with Lag and Jitter, and I can be sure, but I think it was when I maybe hadn't been talking for a few minutes. Matt Riddell On 20 Aug 2004 at 7:54, Vassilis Konstantinou wrote: > > I have the same problem. My setup is: > > Suse 8.0 with 2 single FXO cards with 2 lines coming in and 1 ATA186 > providing the connection to two analogue phones. > > What I get is an almost random hung up during calls (both incoming and > dialed). Sometimes tha call can last for 30 minutes without any > problems sometimes 1min. In all cases the phone switches to the busy > tone and the caller hears nothing, The line does not hang-up though. > > I tried various tests trying to pin down the problem but I was > unsuccessful so far. My latest theory was that this may happen when > the ATA re-registers with Asterisk but as you dont have any ATAs it > seems that my theory is wrong :-( > > Does anybody else have similar problems or knows a procedure to try in > order to identify the source of the problem? > > Vassilis > > > > > At 21:43 19/08/2004, you wrote: > >I have an asterisk server running on Redhat 8.0 with a Digium TDM400P > >w/4 FXO modules (TDM04P) > > > >There are 2 lines going into the Digium card. One line is a Vonage > >digital line, and the other line is a Comcast voice line. I have a > >SIP Grandstream 100 phone connected to the Asterisk server. I also > >have IAX configured with FWD. > > > >The problem is that on occasionally, after talking for about 20 > >minutes or so, the call gets hung up and I get a fast paced busy > >signal. The caller gets dead air. So far this has happened on > >incoming calls to either the Comcast Line, the Vonage Line and it > >just happened while makine and 800 call on Freeworlddialup. The > >problem occurs on both lines for incoming calls and it just happened > >again today on an outgoing call after 15 minutes of talk. > > > >I have tried busydetect=no and yes and neither one make a difference. > > suggestions? > > > >/etc/asterisk/zapata.conf > >busydetect=yes > >busycount=10 > > > >-- > >Ruben Fagundo > >NPV Corporation > > > >Tel: 617-848-0890 x100 > >Fax: 617-249-1994 > > > > > > > >_______________________________________________ > >Asterisk-Users mailing list > >[EMAIL PROTECTED] > >http://lists.digium.com/mailman/listinfo/asterisk-users > >To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
