On Sat, 2004-08-21 at 06:42, Michael George wrote: > I just deployed * on my home system last Sunday. 2x since then the Zap > hardware seems to have malfunctioned on some way. > > One time it would just screech out one FXS, even though it would ring. The > other time * would bridge to my FXO but it never got out on the line. I have > a new TDM400 with 3 FXS and 1 FXO. > > Both times I tried unloading the zaptel drivers (which worked) and reloading > them, which failed. A reboot of the system brought everything back. > > Is this common? Are there ways to minimize this? Would a different PCI slot > possibly make a difference? Or a different system? Is this just a chronic > problem with the Digium hardware?
Most problems with TDM400 cards seem to stem from power supply. That is why there is a power plug on the card to get more power into the card to support the phone signalling. You may have had a small power brown out and it caused your power supply to drop below what the card was happy with. Make sure you have a quality power supply in the computer that has plenty of surplus wattage. Then make sure your machine is on a UPS to make sure the power supply has enough clean power to serve your needs. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
