http://connect.voicepulse.com/ . The calls answer, but DTMF is not recognized.
With "iax2 debug" active pressing DTMF does nothing. Zilch. Zero.
A friend tried a different IAX2 connection, and got the same results.
I see the following in the archives:
On Fri, 2004-04-09 at 10:12, Robert Jackson wrote:
Hey all,
I am dialing a DID through VoicePulse Connect. The number is
answered by a main menu type of IVR. The configuration is as specified
in both the wiki and VoicePulses documentation. The call comes through
without a problem, but when the caller enter any keys they are either
not recieved by * or they are ignored. With SIP I would typically put a
dtmfmode= line under the peer and everything works great, but I am not
sure how to attack this. I found a few items referring to the same
issue in the list, but I didn't find any answers. If this is a bug I
will create a report on the bugtracker, but I would rather make sure
that I am not just completely dense and not seeing the easy answer. I'm
trying to replicate the issue with NuFone.
CVS from 2004-04-04 stable branch.
JC wrote on Wed, 28 Jan 2004 19:47:41 -0500
Hello all, I am using voicepulse DID's to receive calls via IAX to and = asterisk IVR dial plan I have put together. The problem is after 3-5mins = the system cant pickup the DTMF tones I am sending... I have tried = different telephones... It just repeats menu options over and over.... I = have to call back and then it works again for another few mins...
Any ideas... iax.conf? issue?
Thanks, J.C.
Chris,
Thank you for contacting VoicePulse. Our engineers are aware of the DTMF problem and are working to have it
resolved as quickly as possible.
Please reply directly to this email if we can provide any additional
assistance.
Regards, VoicePulse Customer Support
I'm running:
/usr/src/asterisk/asterisk -r
Asterisk CVS-HEAD-08/01/04-22:51:56, Copyright (C) 1999-2004 Digium.
Written by Mark Spencer <[EMAIL PROTECTED]>
=========================================================================
Connected to Asterisk CVS-HEAD-08/01/04-22:51:56 currently running on skip (pid = 2522)
skip*CLI>
My /etc/asterisk/extensions.conf does:
exten => _1NXXNXXXXXX,1,Dial,IAX2/[EMAIL PROTECTED]/${EXTEN}[voicepulse-incoming] exten=510740XXXX,1,Ringing exten=510740XXXX,2,Wait,3 exten=510740XXXX,3,Answer exten=510740XXXX,4,Agi,/usr/local/mipl/agnese|http://www.XXXX.com/XXXXX.cgi?source=${EXTEN}&callerid=${CALLERIDNUM} exten=510740XXXX,5,Hangup
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Is there anyone else with a similar problem? A working setup?
-Bryce
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
