Hi Darren,
Ok, asterisk's H.323 channels works fine. Do you know why you get disconnect from (or can't connect to) your provider? There are some debug available (h.323 debug command).
Probably, if you must use G.729 or G.723, you should know you need to buy licenses for this codecs. If you wish to use G.729, you can buy your licenses from Digium, install the licenses and recompile * with G.729 support.
Daniel
Darren Wiebe wrote:
Does asterisk support using an H.323 provider for outgoing calls? From everything I have found, it looks like it does. However, I have had no success in getting it to work. I would really appreciate if somebody could give me a hand. I am using the channel that comes with asterisk. I have also tried using the channel from inaccessnetoworks but have not had any more success. My provider has not been able to help a lot but they have confirmed that I am using the correct dial string. They have also confirmed that they only support G729 and G723. Sorry about the long post, I thought I better send all the info though.
Darren Wiebe [EMAIL PROTECTED]
chan_h323.so The NuFone Network's Open H.323 Channel 0
This is the result of the following callfile:
-- Attempting call on h323/[EMAIL PROTECTED] for [EMAIL PROTECTED]:1 (Retry 1)
Aug 19 09:18:30 WARNING[-1273607248]: channel.c:1659 ast_request: No translator path exists for channel type h323 (native 257) to 64
Aug 19 09:18:30 NOTICE[-1273607248]: channel.c:1597 __ast_request_and_dial: Unable to request channel h323/[EMAIL PROTECTED]
Aug 19 09:18:30 NOTICE[-1273607248]: pbx_spool.c:235 attempt_thread: Call failed to go through, reason 0
Callfile: MaxRetries: 2 extension: 9999 Channel: h323/[EMAIL PROTECTED] CallerID: LAKEVIEW 4037422000
This is my h323.conf file:
; The NuFone Network's ; Open H.323 driver configuration ; [general] port = 1720 bindaddr = 0.0.0.0 disallow=all allow=g723.1 ; Hm... Proprietary, don't use it... allow=g729
dtmfmode=rfc2833
gatekeeper = 65.17.207.253
context=incoming
[h323] type=h323 prefix=1010 context=outgoing
If I enable all the codecs and switch debug on then this is my output.
-- Attempting call on h323/[EMAIL PROTECTED] for [EMAIL PROTECTED]:1 (Retry 1)
Aug 19 09:23:09 NOTICE[-1273545808]: pbx_spool.c:235 attempt_thread: Call failed to go through, reason 1
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
