Hi,
I was asked about how * could provide redundancy (on the actual PBX Server portion, not the incoming lines), and my immediate thoughts were:
Incoming
========
Basically somehow I'd split the incoming T1 line into two parallel lines and connect them to two * servers.
-----> * Server 1
|
--- T1 ---
|
-----> * Server 2Internal
========
I've got a couple of analog phones that need to be hooked up to *, so somehow I'd split each analog line into two parallel lines feeding into the two * servers.
* Server 1 <-----
|
--- Analog phones
|
* Server 2 <-----
------------------
Server #2 would remain in standby mode, or running some sort of heartbeat detect mechanism to determine if server #1 was still alive. When #2 detects that #1 is down, #2 would start its * process.
Both servers would be identically configured in terms of extensions.conf, sip.conf etc.
My concern is not whether I can create the two * servers -- but rather whether this setup would work based on the splitting and creation of parallel T1 and analog lines.
Does anyone have further insight?
Cheers, Flynn
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
