Cool! I could see this being very useful, for example you could have an IVR that says something like "Please set the priority of your call, 1 for urgent, 2 for normal or 3 for low" then if 1, bellcore-r4, if 2 bellcore-r3, if 1 bellcore-r1!
-Chris ----- Original Message ----- From: "Jay Milk" <[EMAIL PROTECTED]> To: "'Chris Shaw'" <[EMAIL PROTECTED]>; "'Asterisk Users Mailing List - Non-Commercial Discussion'" <[EMAIL PROTECTED]> Sent: Wednesday, August 25, 2004 4:42 PM Subject: RE: [Asterisk-Users] Distinctive Ring Cadences > This is what you're looking for (Sipura SPA-2000): > > exten => 201,1,SetVar(ALERT_INFO=bellcore-r1) > exten => 201,2,Dial(SIP/201,40) > exten => 301,1,SetVar(ALERT_INFO=bellcore-r4) > exten => 301,2,Dial(SIP/201,40) > > This dials SIP-ext 201 with a different ring-cadence when you dial > "301". Sipura Supports bellcore-r1..r8, but even those names (and the > cadences) are configurable in config. > > > -----Original Message----- > > From: Chris Shaw [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, August 25, 2004 5:59 PM > > To: Asterisk Users Mailing List - Non-Commercial Discussion > > Subject: Re: [Asterisk-Users] Distinctive Ring Cadences > > > > > > ----- Original Message ----- > > From: "Mike Meyer" <[EMAIL PROTECTED]> > > To: "Asterisk Users Group" <[EMAIL PROTECTED]> > > Sent: Wednesday, August 25, 2004 2:41 PM > > Subject: [Asterisk-Users] Distinctive Ring Cadences > > > > > > > Hello All, > > > > > > I am looking for a way to do priority call ringing. That is when a > > > caller places a call to another party, they can indicate > > that the call > > > is a priority and get a different ring to occur (ring > > cadence) on the > > > called parties phone. This would be synonymous to an > > intercom ring on > > > a key system. > > > > > > After some investigation, I have come across the ability of the GS > > > BT101 which will ring differently based on the CID. But, > > this doesn't > > > allow the caller to control the ring. > > > > > > I have uncovered some past discussions > > > > > (http://lists.digium.com/pipermail/asterisk-users/2002-Decembe > r/006378.html) > and > (http://lists.digium.com/pipermail/asterisk-dev/2003-June/000916.html ) > regarding patches to support SIP phones and have no idea if they are > implemented features or not. > > > > If anyone knows, please let me know. > > Mike, > > I am in no way a SIP expert so please take my comments with a grain of > salt, but this would require something attached to the INVITE message > sent to the phone. I know that * (with a little patching) can transmit > intercom=yes to a SNOM phone indicating that the incoming session wants > to use the intercom function... If phones have something similar to this > like ringcadence=3 then it could be passed on... I would imagine that > the value you pass to the phone is specific to the make and model of > phone however... Not all phones would use ringcadence= and not all > models would support '3' for example... > > There has been some discussion of this in the bug lists and here on > list, but I'm not sure as to the status of this yet in *... I know for > the Cisco phones, there is a variable called ALERT_INFO you can set to > change the ring cadence but that's the only phone I know of so far... > > It would be soooo cool if Digium made their own brand of phones, or at > least commissioned someone like Sayson to do it for them... then we > could get a completely *-compatible solution with all of the bells and > whistles we want... If we want to go with our own phones, then we would > have to sacrifice the fancy features but at least it would still work! > Maybe they already have something like this in mind? I would be totally > behind it! Especially if it spoke IAX! :) > > -Chris > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
