On Thu, Aug 26, 2004 at 07:08:19PM -0600, Marty Mastera wrote: > > I thought I would repost this info, since it seems relevant to this > thread and may have been missed before this thread started...
Marty, I appreciate your repost of this. I had seen it already and have written to Digium. That was yesterday and I have not yet heard back from them. If I do not hear from them by this afternoon, I will call them and see what I can find out. Thanks! > I too have had problems with the TDM400P (TDM04B as configured) - > symptoms ranging from one of the ports not being answered (no indication > of an incoming call on the CLI), to calls dropping and outbound callers > dialing and getting dead air. Sometimes a unload/load of the modules > was sufficient to get things working again, other times a full reboot > was required. > > Ultimately it was determined to be a design bug in the either the > TDM400P itself or the FXO modules plugged into it. Digium acknowledged > that it was known issue and sent me a replacement card and modules. The > card had been modified, evident from the jumper wire that been soldered > between two points on the back of the card. I haven't had problems > since installing the new card. > > I would recommend contacting Digium support and sending them the serial > numbers from the card and modules... > > Here's my original post for reference: > http://lists.digium.com/pipermail/asterisk-users/2004-August/060008.html -- -M There are 10 kinds of people in this world: Those who can count in binary and those who cannot. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
