Try upgrading to P0S30203.bin first. Apparently Cisco has some kind of filename checking thing, as when I tried to rename P0S3-05-3-00.bin to P0S30503.bin it didn't take, neither did P0S3-06-3-00.bin to P0S30603.bin
First I went to P0S30203 and then I went to P0S3-05-3-00 and then I went to P0S3-06-3-00 and then finally to P003-07-1-00 (Which is some kind of boot loader that then loads the SIP firmware, strange how 7-1 does it).
However, I now have a phone that has an even older firmware, one that won't even take P0S30203.bin like the other one did. I'm reading and I think I need P0S30200.bin or P0S30200.bin ; I may even end up upgrading the Skinny/SCCP firmware a few versions before it'll jump to the SIP firmware.
Pavel Jezek wrote:
look to your SIPDefault.cnf or SIP<macaddress>.cnf on TFTP server if you have is correct file name in "image_version:" section
PJ
----- Original Message ----- From: Tracy R Reed Newsgroups: gmane.comp.telephony.pbx.asterisk.user
Sent: Friday, August 27, 2004 11:48 AM
Subject: Can't flash 7960: P0S30200 .bin not found
When I try to flash my 7960 with SIP I get messages like this in the tftp server logfile:
Aug 27 02:01:17 home tftpd[32590]: tftpd: trying to get file: P0S3-03-0-00 .bin
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
