Edward Eastman wrote:
I've got a TDM11B with the fxo port plugged into a standard UK BT PSTN line, loading wcfxs with OPERMODE=UK. All's working well, except if I get an incoming call through my bt line, and the remote party hangs up, I get approx 20secs of the bt line hungup tone before asterisk hangs up, which leads (if nothing else) to the well documented 20secs of beep on vm problem :)
I have tried: busydetect=yes / busycount=7 / other busycounts / callprogess=yes but none of these make any difference. I have loadzone/defaultzone=uk and country=uk in indications.conf and fxs_ks signalling.
Try increasing your RX gain in 1db steps, until it reliably hangs up.
I had a box with X100Ps which busydetected perfectly with default gain settings. When they were replaced with TDM FXOs, busydetect stopped working and I needed 3db of RX gain added to get it working again.
Regards,
Richard _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
