On Mon, 30 Aug 2004, Imran Akbar wrote:
> Hi, > I've been trying to get my zaptel x100p cards working for the past > week now. this is what I've done: > > installed asterisk: > make clean > make linux 26 (for fedora core 2) > make install > > installed zaptel: > make clean > make > make install > > did a modprobe zaptel, and wcfxo > got this in /var/log/messages: > PCI: found IRQ 11 for device 0000:00:0f.0 > wcfxo: daa mode is 'FCC' > found a wildcard fxo: wildcard x101p > ... > > in zaptel.conf: > fxsks=1-2 > > in zapata.conf: > signalling = fxs_ks > channel => 1 > channel => 2 > > yet when i run asterisk, the zap show channels command doesn't work. in > a previous thread they mentioned this is because some chan_zap.so file > isn't loaded because of the zaptel installation. I was told I had to > REINSTALL asterisk after the zaptel stuff, which again didn't do > anything. How can this be so hard to even get installed? > > Thanks, > Imran Assuming your zaptel.conf and zapata.conf files are correct, you should have to issue a ztcfg -v. The output you see should match your configuration. In the future if you make changes to your zap*.conf files, you need to stop asterisk, re-run ztcfg, then restart askterisk. The reload command doesn't do anything with the zap*.conf files. I hope this helps. This is first time helping on this list. Thank you, Steve Maroney _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
