I need to know how to setup the data side of the T1 on my Linux Box. I
have found information about configuring a PRI and HDLC but nothing
about the Frame-Relay type setup for data.
The following is information from our T1 provider.
Network T1:
Framing = ESF
Line code = B8ZS
Build out = 0-133ft(DSX)/0dB(CSU)
Clock = network
Pulse-density-enforce = off
alarm-option = on
alarm-delay = 15
is-slave = off
DS0 Provisioning:
analog-begin = 1
analog-end = 16
data-begin = 17
data-end = 24
alignment = same
(The following is what our Vina T1 Integrator currently has in its
settings. Our Linux box will replace the Vina)
Synchronous Interface:
encapsulation = Frame-Relay
HDLC-inversion = off
Encap-data:
LMI-Type = T1.617-annex-D
N391 = 6
N392 = 3
N393 = 3
T391 = 6
PVC1 :
DLCI = 100
IP = ---.---.---.---
netmask = 255.255.255.252
RIP = disabled
NAT = OUT
Thank you for the help ahead of time!
--Shawn
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
