Yes I tried this too. But the problem is the same. On Fri, 3 Sep 2004, Michael Bielicki wrote:
> did you tried it with crc4 as well ? > span=1,1,0,ccs,hdb3,crc4 ? > > On Fri, 2004-09-03 at 13:00, Steven Critchfield wrote: > > On Fri, 2004-09-03 at 05:31, Jan Goericke wrote: > > > Hello ml, > > > > > > i need some help on my zaptel configuration. My E100P only shows some > > > YELLOW / RED alarm when I load the wct1xxp module and do a > > > > > > cat /proc/zaptel/1 > > > > > > Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED > > > ... > > > .. > > > . > > > > > > > > > My /etc/zaptel.conf is: > > > > > > span=1,1,0,ccs,hdb3 > > > bchan=1-15,17-31 > > > dchan=16 > > > loadzone=nl > > > defaultzone=nl > > > > > > I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a > > > configuration problem. Can anyone give me a hint how to configure my > > > E100P? > > > > Next step is to start asterisk so libpri attaches to your line and > > brings up the D channel. > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
