Peter,
thanks for trying to help.
I've enabled overlap dialing with no effect.
"pri intense debug span 1" gives this output:
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 000 EA: 1
< N(S): 102 0: 0
< N(R): 105 P: 0
< 41 bytes of data
-- ACKing all packets from 104 to (but not including) 105
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=41
< Call Ref: len= 2 (reference 102/0x66) (Originator)
< Message type: SETUP (5)
< [04 03 90 90 a3]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: 3.1kHz audio (16)
< Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16)
< Ext: 1 User information layer 1: A-Law (35)
< [18 03 a9 83 81]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
< ChanSel: Reserved
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 1 ]
< [1e 02 80 83]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: User (0)
< Ext: 1 Progress Description: Calling equipment is non-ISDN. (3) ]
< [6c 0b 21 83 38 39 38 39 34 33 39 39 30]
< Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation allowed of network provided number (3) '123456789' ]
=================================================================^
I changed this number to protect privacy. But it is 9 digits and it is correct.
=================================================================
< [70 07 c1 38 34 30 30 35 33]
< Called Number (len= 9) [ Ext: 1 TON: Subscriber Number (4) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '876543' ]
=================================================================^
I also changed this. len=9 should mean 9 digits, right? the number i dialed is "87654321", the "21" is missing.
=================================================================
Sending Receiver Ready (103)
> [ 02 01 01 ce ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 000 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 103 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
> [ 00 01 d2 ce 08 02 80 66 02 18 03 a9 83 81 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 000 EA: 1
> N(S): 105 0: 0
> N(R): 103 P: 0
> 10 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=10
> Call Ref: len= 2 (reference 32870/0x8066) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 81]
> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> ChanSel: Reserved
> Ext: 1 Coding: 0 Number Specified Channel Type: 3
> Ext: 1 Channel: 1 ]
-- Accepting call from '123456789' to '876543' on channel 0/1, span 1
Any ideas?
Cheers,
Oliver.
On 07.09.2004, at 00:51, Peter Svensson wrote:
On Mon, 6 Sep 2004, Oliver Breidenbach wrote:
We are calling from a number in the same local area code and there seems to be only the 6 most significant numbers of the target adress arrive in Asterisk.
For example, we are calling 99999123 and the CLI shows only the 999991 and tries to match that with a extension rule.
(We've set up a rule for _99999XXX with StripMSD(5) and a rule for extension 123.)
The strange thing is that if I dial the number with the area code (i.e.
089/99999123) or from a mobile fone it works and properly connects to
the correct extension.
Perhaps the rest of the number is sometimes sent as overlap digits? Try
doing "pri intense debug span XXXX" and see if there are additioal digits
coming in as overlap. Or try enabling overlap dialing for that span.
Peter
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
