Hi,
I have on my dual opteron (64 bit mode, linux) the problem, that sometimes read errors (unknown error 500) occur.
This was already discussed on some asterisk list, and the solution seems to be to put the digium card on the highest interrupt level.
Unfortunately I don't know howto. Applying an irq parameter when loading the module don't work: wct4xxp: Unknown parameter `irq'
Within the bios menu I can't find any appropriate mean. But I assume, that there is a operating system mean, in order to assign the digium card another interrupt.
Thanks for any hints! Roger.
cat /proc/interrupts CPU0 CPU1 0: 92446503 0 IO-APIC-edge timer 2: 0 0 XT-PIC cascade 8: 0 0 IO-APIC-edge rtc 9: 0 0 IO-APIC-level acpi 14: 35414 0 IO-APIC-edge ide0 15: 28 0 IO-APIC-edge ide1 19: 0 0 IO-APIC-level ohci_hcd, ohci_hcd 28: 92169476 0 IO-APIC-level t4xxp 29: 924252 0 IO-APIC-level eth0 30: 2516959 0 IO-APIC-level eth1 NMI: 8011 699 LOC: 92432790 92433436 ERR: 0 MIS: 0
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
