Hello, i have exactly the same problem.
> Hi, > debian sid > kernel 2.6.7 > cpu: AMD Duron(tm) Processor same dist, same kernel, same CPU, also bri-stuff RC4a > kernel.log: > Aug 23 17:33:40 weblogin kernel: Zapata Telephony Interface Registered on major 196 > Aug 23 17:33:40 weblogin kernel: zaphfc: no version for "zt_receive" found: kernel > tainted. > Aug 23 17:33:40 weblogin kernel: PCI: Found IRQ 10 for device 0000:00:0a.0 > Aug 23 17:33:40 weblogin kernel: PCI: Sharing IRQ 10 with 0000:00:07.5 > Aug 23 17:33:40 weblogin kernel: zaphfc: Digi International Digi > DataFire Micro V (Europe) configured at mem 0xe091a000 fifo > 0xcf598000(0xf598000) IRQ 10 HZ 1000 > Aug 23 17:33:40 weblogin kernel: zaphfc: Card 0 configured for TE mode > Aug 23 17:33:40 weblogin kernel: zaphfc: 1 hfc-pci card(s) in this box. > Aug 23 17:33:40 weblogin kernel: Registered tone zone 11 (Italy) > Aug 24 04:47:57 weblogin kernel: zaphfc: sync lost, pci performance too > low. you might have some cpu throtteling enabled. I am running the card in NT-Mode, it happens some hours after zaphfc and asterisk are loaded. It takes a lot of CPU load for syslogging (the message repeats a lot) and asterisk connections are disturbed (fast crackling). Last time it happend it was solved by unloading asterisk and zaphfc and loading it again. The first time I had it I had to reboot, otherwise ist startet just when I startet ztcfg. > should i add MARCH=i586 option to asterisk/Makefile ? Did you try it, did it help? Any other hints? Greetings Hartmut -- Hartmut Wahl <hwahl (at) hwahl (dot) de> www: http://www.hwahl.de PGP: http://www.hwahl.de/HartmutWahl.asc _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
