|
You don't have a T1 connected to the card or you
are using a wrong cable or... A red alarm says 'I don't like the signal
coming in from the far end'.
Could be no signal, could be incompatible signaling
options, could be wiring issues, could be most anything.
Lyle
----- Original Message -----
Sent: Monday, September 13, 2004 5:40
AM
Subject: [Asterisk-Users] Red Alarm -
Config Zaptel card
hi all,
can anyone give solution for this.
wct1xxp
- Digium Wildcard T100P T1/PRI Card 0
zttool
gives
RED Digium Wildcard
T100P T1/PRI Card 0
my zaptel.conf look like
this
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
defaultzone=us
the
above 5 lines only placed in my zaptel.conf file
Regards
Murali
![]()
_______________________________________________
Asterisk-Users
mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To
UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
|
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
