> > I've tried setting up my sip.conf in two ways: > > > ------------------------------------------------------ > register => [240xxxxxxx]:[EMAIL PROTECTED] > > > [Broadvoice] > type=peer > username=[240xxxxxxx] > fromuser=[240xxxxxxx] > secret=[my_password] > host=sip.broadvoice.com > context=incoming > fromdomain=sip.broadvoice.com > nat=no > canreinvite=no > dtmfmode=inband > -------------------------------------------------- > > This results in complaints from asterisk in the logs: > > Sep 13 15:14:16 NOTICE[1087249200]: Registration for > '[EMAIL PROTECTED]' timed out, trying again > > And at the CLI: > > -- parse_srv: SRV mapped to host proxy.lax.broadvoice.com, port 5060 > -- Got SIP response 404 "Not found" back from 147.135.8.128 > > Sep 13 16:07:40 NOTICE[1087249200]: chan_sip.c:3922 sip_reg_timeout: > Registration for '[EMAIL PROTECTED]' timed out, > trying again > -- parse_srv: SRV mapped to host > proxy.dca.broadvoice.com, port 5060 > -- Got SIP response 404 "Not found" back from 147.135.0.128 > > and a busy message when I attempt to dial into the box. > > If I move the "register" line down into the "[Broadvoice]" > section of the sip.conf file, the complaints in the logs and > at the CLI stop, but I still get the busy message when I try > to dial into the box: >
The register line needs to be under the general section of sip.conf...you may not get the same errors when you move it into the broadvoice section, but that's b/c it's not processed and no registration is ever attempted. Check your formatting for the username and password....there shouldn't be any brackets surrounding either (ie the register line should look like: register => 240XXXXXXX:[EMAIL PROTECTED] and the same for those entries in the broadvoice section). If you're sure you have the username and password correct in your register statement, and you have SRV lookups enabled in the general section and you're still getting registration timeouts with "404 Not Found" I would think you need to call Broadvoice and let them know about the "404" errors to make sure your account is provisioned correctly. Until you get the registration to work succesfully, you should expect problems when dialing your BV number. Marty _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
