On Sep 13, 2004, at 11:32 AM, Andrew wrote:
I'm a bit new to the terminology. Let me ask my question more simply, even though I think you already answered that "it should
work"
I want to receive calls into the Asterisk PBX via a cheap POTS->PBX method, such as a WinModem or other FXS endpoint on the Asterisk
PBX.
I want the caller ID & call-waiting information that comes in on that line to be forwarded by the Asterisk PBX to a connected IP
phone.
This will "just work".
One gotcha is to consider who is going to provide your call waiting... will it be Asterisk or will it be the phone company? If it's the phone company, you'll have a bit of a roundabout way of answering the second call (i.e. a simple hook flash won't work). Someone else on the list detailed the steps for that in a previous reply.
Most importantly: I also want to connect a POTS phone via an IP<->FXO jack, such as the one supplied by www.pcphoneline.com and I
want to know if the caller ID/call-waiting is likely to work on that POTS phone.
I'd read http://www.voip-info.org/wiki-FXO just to make sure you're getting FXO and FXS straight in your head.
If you're serious about setting this up trouble-free, I'd recommend using Digium's (www.digium.com) hardware to start. They sponsor Asterisk and their stuff simply works. Other products are known to work as well, but you'll be spending a lot of the time troubleshooting the hardware rather than doing neat things with the PBX. All of Digium's hardware supports Caller*ID.
Generally, the normal practice is to have the line from the phone company terminate into an FXO jack on a PCI card in the computer running asterisk. You can then get IP->FXS adapters (Digium sells the IAXy) that provide ring voltage to your phones.
Hope that helps, Chad
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
