On 2004-06-25 at 22:12, Steve Hanselman ([EMAIL PROTECTED]) wrote:
> If you cat /proc/interrupts is anything else sharing with the TEs?
It doesn't seem to:
CPU0 CPU1
0: 5413 5623 IO-APIC-edge timer
1: 0 5 IO-APIC-edge keyboard
2: 0 0 XT-PIC cascade
8: 1 0 IO-APIC-edge rtc
14: 2722 3918 IO-APIC-edge ide0
15: 19 19 IO-APIC-edge ide1
16: 45283 32056 IO-APIC-level tor2
17: 31891 45048 IO-APIC-level tor2
18: 31625 44915 IO-APIC-level tor2
19: 176 3 IO-APIC-level eth0
NMI: 0 0
LOC: 10947 10945
ERR: 0
MIS: 0
I've turned off everything in the BIOS that I can like all serial
ports, parallel port, APCI.
Interestingly, the system no longer dies in a panic() but with DMA
errors scrolling across the console.
hda: DMA interrupt memory
hda: lost interrupt
hda: dma_timer_expiry: dma status == 0x24
If I pull out the T400P boards, no problems.
I'll leave my original message in below as it's been a while. I've
been away most of the summer and I leave for Asia on Sunday but I'm
trying to resolve this as best I can. Thanks.
> -----Original Message-----
> From: Jim Gottlieb [mailto:[EMAIL PROTECTED]
> Sent: 25 June 2004 20:31
> To: [EMAIL PROTECTED]
> Subject: [Asterisk-Users] panic() panic() panic()
>
> Hi all. I've been trying to build some new systems, and no matter what
> I do, if I load the zaptel and tor2 drivers, the system panics within
> an hour, even with no traffic.
>
> These systems are using dual Athlon MP 2800 chips with one, two, or
> three T400P boards and 2 GB of system memory.
>
> I'm currently using Fedora Core 1, but I also went back to our old
> reliable Red Hat 7.3 and the systems still panic()ed.
>
> If I don't start the zaptel driver, they don't panic. If I start the
> zaptel driver, but don't start asterisk, they still panic. I'm at a
> loss of what to try next.
>
> A typical Call Trace from the panic message looks like:
>
> wait_on_irq, [kernel] 0xde
> __global_cli [kernel] 0x62
> flush_to_ldisc [kernel] 0x126
> __run_task_queue [kernel] 0x61
> context_thread [kernel] 0x13b
> context_thread [kernel] 0x0
> context_thread [kernel] 0x0
> kernel_thread_helper 0x5
>
> Any ideas? Thanks...
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
