zaptel.conf looks good - you may require a ",crc4" at the end of the span line, depending on your provider. I have "loadzone=us" in mine as well. Change appropriately for yours.
zapata.conf also looks good. I would also add the following, before the channel declaration: immediate=no pridialplan=unknown usecallerid=yes Setting immediate=no allows your calls to be answered and routed according to the DID entries you make in your extensions.conf file (the "dialplan"). Setting it to yes would cause the "s" extension to be used instead. So you need entries in the dialplan for each DID, under the context "[default]" which you have defined in zapata. That will take care of inbound calls. Outbound calls: Since you've defined group 1 as including all channels of your PRI, you can use the Dial command and use a "g1" instead of a specific Zap channel, to allow asterisk to choose an available channel. All of this is covered on the Wiki: http://www.voip-info.org/tiki-index.php?page=Asterisk Good luck with your project! Scott M. Stingel President, Emerging Voice Technology, Inc. Palo Alto California & London England www.evtmedia.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of HengWee Chin Sent: Thursday, September 16, 2004 4:24 AM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] Help with E1 configuration Hi, I currently have a E100P card installed on my machine and the E1 subscription will be activated pretty soon. However, I have no idea how to configure asterisk to make inbound and outbound call using the E1. Especially for extensions.conf. Below is the configuration I used for zaptel.conf and zapata.conf. Is it possible if someone can verify if the configuration for zaptel and zapata is correct? zaptel.conf ----------- span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 zapata.conf ----------- switchtype=euroisdn signalling=pri_cpe group=1 context=default channel=1-15,17-31 I have 1 block of 10 DID numbers that will be subscribed together with E1. I am not able to find any sample for the extensions.conf to do inbound and outbound call. Is it possible for someone could post a sample of how the configuration would look like. Any setting missing for callerid support? PS: I already have an existing asterisk system running on analog ports. This is just an upgrade. Thanks in advanced. Regards, Chin _________________________________________________________________ Fast. Clear. Easy. The new MSN Search. http://search.msn.com.sg/ _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
