What type of existing PABX do you have (Make and Model) What interfaces can you use to connect to your PABX, ie analog tie lines, E1/ISDN, anything else?
Cheers, Peter -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of P J Sent: Friday, 17 September 2004 12:19 PM To: [EMAIL PROTECTED] Subject: [Asterisk-Users] SIP Phone -> PBX Phone Hi, I'm new to Asterisk, and am researching information on linking Asterisk to an existing PBX. Could somebody please help me with what might be required for the following setup? - - We have an existing PBX. - I am going to setup Asterisk on our internal network along with some internal SIP phones. - I understand how Asterisk will act as the SIP Server, and SIP phones will be able to call each other, however - - I would also like to link Asterisk to our existing PBX so that SIP phones could call standard phones on our existing PBX system (and vice-versa). - I *do not* need to use Asterisk to call out via PSTN or ITSP. All outbound calls will be via the existing PBX. What hardware device is required to link the Asterisk box to the existing PBX? Could the SIP phones call the standard phones on our existing PBX system? If so, how does Asterisk do this? Thanks in advance. Ps. Even though I *do not* need to use Asterisk to call out via PSTN, what hardware device would be required to do this? And, how does this device differ from the device that links Asterisk to the existing PBX? _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
