On Thursday 16 September 2004 04:27 am, Vlasis Hatzistavrou wrote: > Hello all, > > We have been testing Asterisk RC2 with the native H323 channel driver. > We followed the instructions with the needed OpenH323 and PWLib versions > and everything compiled ok. Operation of the driver seems ok, except > from 2 main points: > > 1) Audio is passed between the two ends of the call only after the call > is answered. This was not the case with previous versions of Asterisk > (0.9.2 for example), in which audio would begin before the call was > answered. Early audio is useful i order to provide the calling user with > remote end ringback as well as recorded announcements, etc.
You may want to look at/try this http://bugs.digium.com/bug_view_page.php?bug_id=0000562 > 2) The codec capabilities that Asterisk sends seem strange. No matter > which codecs we set in the h323.conf file, G711 is the only codec that > is sent in the capabilities. In order to use any other codec, we have to > enable only the needed codec and disable all others. Again, this problem > did not exist in older * versions, like 0.9.2 and it's limiting the > capabilities of Asterisk in H323. > > Has anyone dealt with this problem successfully? > > Best regards, > > -- > Vlasis Hatzistavrou. > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
