Re: [Asterisk-Users] Re: Fw: Asterisk R2 Signaling

[Steve Underwood]

This is complete rubbish. The default for that code is China R1, 
although some measure of partial support for Argentina in in there too. 
I wrote that code, and it is useless. It works as well for incoming 
calls as it does for outgoing - its useless. When I did a proper 
implementation of R2 signalling after I wrote the code in Digium's CVS I 
started again from scratch. If anyone else would like to implement R2 I 
suggest they do the same.

I really wish Mark would remove this from CVS, as It just keeps 
inspiring these useless exchanges.

Regards,
Steve
Chris Ziomkowski wrote:
I did quite a bit of work on this library about a year ago. In the 
end, I abandoned it because the project went belly up.

I can tell you this much....
MFC-R2 for Argentina is the default configuration and looked fairly 
well supported in the source code. I, of course. couldn't check it 
because I'm not in Argentina, but my guess is it would probably work 
with only minor if any modifications.

The big drawback however is that it only works for incoming calls. If 
you want to do outbound, forget it. I had to write the outbound 
dialing routines from scratch.

So, if you're looking for inbound IVR type stuff and you are in 
Argentina, I would recommend getting the MFC library from Mark. It is 
available but not advertised in the CVS tree. He put it in there for 
me last year.

You can probably make it work with not a lot of effort, but it does 
take some coaxing to get it to compile. I wouldn't try it without 
having someone around who is a pretty good developer to help you 
through the rough spots.

Good luck and let us know how this turns out for you.
Chris Ziomkowski
At 06:28 PM 9/17/2004 +0200, you wrote:
+++ Tenorio, Leandro [15/09/04 10:58 -0300]:
> I've seen a lot of times, people that try to get R2 MFC to *, most 
of them trying to use Dialogic Boards (BTW They 're Very expensive), 
none of them where succesfully,
> If you want to use PCI Cards on your server, why don?t u ask to 
your carrier to provide you E1/PRI? or better put a Gateway with E1s 
and SIP.
>
> I'm in Argentina also and I get PRI E1s from some of the Carriers

I'm from India and I'm trying to look for info abt E1 R2 and asterisk 
too.
What do u mean by "put a gateway with E1's and SIP" ? I dont know if any
providers provide E1/PRI who they need any extra hardware for that ?

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users