TO use * with a 5300 using SIP, just make a dial-peer and send
the calls using dial([EMAIL PROTECTED]) should work, I'm using it go to and
from.
Actually its MUCH MORE Stable to use * in native SIP. The code
for H323 it's not very updated.
LTenorio
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Carlos
Maynard
Sent: Saturday, September 18, 2004 12:18 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] SIP->Asterisk->GnuGK->Cisco 5300
Anyone has sample configuration files for this setup ?
Start calls from a Sip client... and terminate them on a Cisco
Gateway... going thru Asterisk and GnuGK?
I have SIP clients working ok through asterisk ...
I also have H323 Clients working great through GnuGK-> Cisco Gateway
What i've not been able to do is Terminate calls from SIP to the Cisco
Gateway.
Asterisk always get a security denial when trying to Register with
GnuGK.
Also... when i try to call from console i get a CallerNotRegistered
error.
I'd greatly appreciate anyone who can share Sample configuration files
for Asterisk and GnuGK.
Regards,
Carlos.
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
