On Fri, 2004-09-17 at 23:37, Kristian Kielhofner wrote: > Sys. Concept Inc. wrote: > > > How to Connect SPA-3000 to Asterisk so * will answer? > > After setting up Asterisk on Gentoo the extension.conf contains [demo] > > context; but my asterisk is not answering? > > > > In SPA-3000 in PSTN Line - tab under Dial Plan 1 I have: > > S0<:[EMAIL PROTECTED]> > > Default dial plan is set to 1. > > My box's IP where Asterisk is running has IP: 10.0.0.101 > > Line 1 - tab has: > > SIP Settings Port: 5060 > > Nat is disabled as both Asterisk and SPA-3000 are behind firewall. > > > > What am I missing? > > > > -- > > #Joseph > > Check this out from Voxilla: > > http://voxilla.com/forum-viewtopic-t-557.html >
I checked their forum, actually Voxilla is the place I bought the SPA-3000 unit from. But the configuration instructions are not clear to me, there is a lot of information but none is complete. The SPA-3000 unit might be good but the configuration is nightmare and Sipura manual is only good for reference nothing else in addition they do not offer any support. If I was to recommend any unit, go with Digium cards and stay away from Siupra -- #Joseph _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
