Hello, folks! This is my first post here. I installed Asterisk from scratch and after reading a lot of information on voip-info and this mailing list I was able to get started.
I can make sip-to-sip calls (just on a basic extentions structure, let's say for beginners) but now I'm trying to make this system works with my Teles ISDN BRI PCI card. I can make and receive calls through X-Ten Pro software. Calls are routed through Asterisk to/from X-Ten client but here's my real problem: NO AUDIO AT ALL! I can't hear anything, nor can the other party. Does anyone here now anything about it? Am I doing anything wrong? I'm new to ISDN under Linux, but I think it's ok since the calls are corectly routed and I can see info on isdnlog. I also tested my card on minicom, as suggested on voip-info. One more question: can I route SIP calls to a ISDN (digital) phone connected on the same bus? How do I set the TEI on which the call should be answered, in case it's possible? By the way, I never used this ISDN card to place/receive calls or connect to an ISP on Linux, but I already received/transmited faxes on Windows 2000 SP4 before installing Asterisk. Thank you so much in advance and I appologize if these questions have already been answered somewhere. I just need some guidance. Take care, [ Dhennys Pestana ] [ +55(21)9339-3737 ] Linux: SuSE 8.2 2.4.20-4GB Asterisk: 1.0 RC1 (from tarball) ISDN BRI: lspci shows "Tiger Jet Network Inc. Intel 537", but I know for sure it's actually a "Teles PCI" cause I bought it on a sealed box _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
