|
I need a timing device for the DL360G2 for conferencing and
meetme. For a timing device I have 2 X100P cards but neither will work in my
DL360G2. The system will not even boot with either card in the system. Other
PCI cards seems to work fine. I called Digium support and was told that there
must be a conflict between the card and my Compaq DL360G2. I then moved on to ztdummy. I’m sure the DL360 G2 has
a OHBI rather than UHBI controller. That said, I got this message during
modprobe ztdummy: [EMAIL PROTECTED] zaptel]# modprobe ztdummy /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o:
init_module: No such device Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters. You may find more information
in syslog or the output from dmesg /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o:
insmod /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o failed /lib/modules/2.4.20-6smp/kernel/drivers/usb/usb-uhci.o:
insmod ztdummy failed I then moved on to zaprtc. However, I was told that this
solution will not work with SMP systems. My DL360G2 is a dual proc machine. I’m running out of options here…please advise. Thanks,
identity mine, inc. - http://www.identitymine.com |
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
