On Sun, 19 Sep 2004 07:29:16 -0500, Andy <[EMAIL PROTECTED]> wrote: > Everything works perfectly, except for the following problem: > Sporadically -- about once in 6 hrs, Asterisk reports a "Red Alarm" from > the X100p. Thereafter, the X100p no longer works -- no outgoing calls > can be placed; no incoming calls answered. > The problem can be cleared in one of two ways - the phone line can be > unplugged and plugged back in again, or asterisk can be shut down, the > zaptel module uloaded from the kernel, and then reloaded.
I had the same problem in an Athlon 900Mhz, with a MSI MoBo. Tried Linux 2.4 and 2.6... Then I changed to a dual Athlon MP 1400Mhz on a Tyan Tiger MoBo. Same problem... Then I moved to a Pentium 4 2.8Ghz, (I can check later, but I'm almost sure it's an Asus MB). It's up and running for 5 days without any problems (or module reloading, or reboot). I also replaced the phone wires with newer ones, but I don't believe that was causing the Red Alarm problem. This week, I'll hook up the old cable just to make sure, but I did read other people complaining about problems on AMD based systems, and also reporting 100% ok on Intel based... I'm not happy about this, but life isn't fair. Regards, Marconi. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
