Yes, I tried adding an adaptec that I thought was uhci. This didn't work. I didn't check the specs but figured that they would be uhci given the history of ohci.
Regardless, I will confirm with adaptec. Thanks, Chad -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kristian Kielhofner Sent: Sunday, September 19, 2004 6:27 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] Timing source on SMP system - DisableRTC forzaprtc Chad Brown wrote: > Kristian, > > I have 2 X100P cards but neither work on my Compaq DL360 G2. The system > will not even boot! Take a look at my initial post and let me know if > you have any other advice. Regardless, thanks for your post! > Oh that was you? I read that post earlier but obviously didn't put it together... I don't know about this, but have you tried an add-on usb-uhci controller (your motherboard is OHCI, right)? I don't know if that would work, but you could try it... What about a TDM400 with a module (any module FXS/FXO)? -- Kristian Kielhofner _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
