On Wed, 22 Sep 2004 10:20:58 -0400 (EDT), Jon Miron <[EMAIL PROTECTED]> wrote:
> Hey all,
>
> Wondering if this is possible.. Incoming call is
> answered through X100P, then an extension is dialed
> using the same X100P card. Basically I want to dial
> in, enter 9 + <phone#> and have it do a flash then
> have it dial *08 <the same phone number> + # on the
> same PSTN line to have it transfer my call to another
> phone number. I realize this isn't very safe, but I
> would like to be able to make long distance calls to
> any number while I'm out with my cell phone so I want
> to take advantage of my free LD package on my PSTN
> line. Thanks in advance!
Three applications that would allow you to achieve something like that
- disa, flash and senddtmf.
This is untested, but some logic like the following might help:
Use something like the following in your IVR.
exten => 10,1,DISA,1234|calltransfer
Then, add the context and code like:
[calltransfer]
exten => _X.,1,Flash
exten => _X.,2,Wait,1
exten => _X.,3,SendDTMF(*08${EXTEN}#)
exten => _X.,4,Hangup
I'm not sure off hand how you could terminate a number with #, but
DISA will proceed after 10 seconds anyway.
I'd be curious to see if it works - so let us know.
-Shaun
_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
