I had a similar problem but not exactly same: when telco lines are plugged into the FXO ports, initially "zap show channel 1" says it is "Onhook" but I cannot make outgoing calls. Once I unplug the telco line and re-plug it, or after there is an incoming call, "zap show channel 1" says "Offhook" but both incoming and outgoing calls work fine. I believe this is related to a incomplete fix to bug #2359 but my limited knowledge does not enable me to track down or fix the problem.
----- Original Message ----- From: Felix Pizarro <[EMAIL PROTECTED]> Date: Fri, 24 Sep 2004 08:53:20 -0700 (PDT) Subject: [Asterisk-Users] TDM channel shows Offhook when I plug it to the telco To: [EMAIL PROTECTED] Hello, everyone I am having problems with a TDM400 that has 3 fxs modules and 1 fxo. When plug a line from the telco to the fxo module it changes state from onhook to offhook, and of course I can not receive any calls. (When I tried to call from the outside to that line it shows as busy). Could someone help me? I am at the customers site ;( Thanks a lot _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
