Sorry to post such a newb set of questions but I have been hammering about trying to get Asterisk running on FC2 machine reading everything available (I think that is what stuffed me, shouldn't have read it all :-) ).
Config
FC2 running Asterisk 1.0.0, with the h323 compiled in and installed correctly.
Amazingly enough I have everything compiled correctly and installed.
I am running a TDM400P, Port 1 FXS, Port 4 FXO.
I have my PSTN line plugged into 1 port and my Analogue phone plugged into port 4 (I think that's right I get tone on the phone when I pick it up and echo works).
/etc/zaptel.conf
fxols=1 fxsls=4 ; Weird but I was told to have the fxols fxsls reverse to the actually module loadzone = au defaultzone = au
/etc/zapata.conf
[channels] context=default switchtype=national usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 signalling=fxo_ls callgroup=1 pickupgroup=1 immediate=no context=internal busydetect=yes callerid="James Bean<690>" ;assuming extension 690 mailbox=690 ;stutter tone for voicemail - you can use an optional context here transfer=yes channel=>1 group=2 signalling=fxs_ls context=pstn
Here you have a context of pstn, which I assume is your incoming dialtone.
channel=>4
Extensions.conf
But where is the pstn context in Extensions to match the above incoming dialtone?
Mayb you want something like this:
[pstn]
exten => s,1,NoOp(Comment Only: Call from ${CALLERIDNUM})) ; Just put a comment in the CLI for info.
exten => s,2,Dial(Zap/g1,45,t) ;Dial the group=1 zap card mod above
exten => s,3,VoiceMail(u100) ;Whatever box you want.
[internal] exten => i,1,Playback(invalid) exten => i,2,Hangup exten => t,1,Hangup
exten => 099,1,Echo ;simple echo test when you dial 099 on your phone
[outgoing]
exten => _1XX,1,Dial(H323/[EMAIL PROTECTED]) ; 1xx extension to Salisbury exten => _2XX,1,Dial(H323/[EMAIL PROTECTED]) ; 2xx extension to Marcoola exten => 610,1,Dial(H323/[EMAIL PROTECTED]) ; 610 to Jindalee exten => 620,1,Dial(H323/[EMAIL PROTECTED]) ; 620 to Batteryhill
exten => _54XXXXXX,1,Dial(H323/[EMAIL PROTECTED]) ; 54 to Marcoola exten => _0754XXXXXX,1,Dial(H323/[EMAIL PROTECTED]) ; 54 to Marcoola
exten => _XXXXXXXX,1,Dial(Zap/g2/${EXTEN})
H323.conf
[general]
port = 1720
bindaddr = 192.168.69.1 tos=lowdelay
disallow=all allow=g723.1 allow=gsm
--------------------------------------
I can pick up the phone and ring 099 and echo works but if I dial anything else I just get a busy signal with no errors on asterisk -vvvvc, what I need is for ANY incoming calls to make the analogue phone ring.
See comment above.
Outgoing calls that fit the rules use h323, everything else should pick up the PSTN line and dial.
I again apologise for the mess and newbness (did I just invent a word), I just need a kick start and get the basic stuff working before I start playing.
Also, anyone had asterisk talking to OKI Voip like BV1250 units working?, if so can you drop me an email.
No idea on that.
--
respectfully, Joseph -------------------- _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
